商铺名称：天津博莱特仪器设备有限公司
联系人：肖丽雯（小姐）
联系手机：
固定电话：
企业邮箱：2968541877@qq.com
联系地址：中国 天津市武清区 自贸试验区（空港经济区）保航路1号航空产业支持中心
邮编：300010
联系我时，请说是在口碑仪器网上看到的，谢谢！
防紫外线驾驶镜蛤蟆镜偏振轴位测试机/驾驶镜蛤蟆镜偏光测试仪
偏振轴位测试仪技术参数
1.讀數度盤：-15-+15°
2.最小讀數：1°
3.光源：鈉燈(589nm)
4.外形尺寸:27×37×34 CM(長×寬×高)
5.重 量:10 Kg
6.輸入電壓：AC100~240V 50/60Hz
1. 將正確之電源送上，將電源開關打開即可。
产品优点：此产品可替代意大利 LEMA PA1 产品
Technical beters of polarization axis tester
1 reading dial: -15-+15 degrees
2 minimum reading: 1 degrees
3 light source: sodium lamp (589nm)
4 dimensions: 27 x 37 x 34 CM (L * w * h)
5 weight: 10 Kg
6 b voltage: AC100~240V 50/60Hz
Polarization axis tester
1 the correct power supply, the power switch can be turned on.
2 will be required to test the glasses, fixed in the test b; that is, before the light source, up and down the 2 plastic fixture b. This fixture can adjust its angle, the angle must be adjusted according to the different radian of the frame, the adjustment must be parallel to the two light sources, and the front and back of the eye must be the same.
3 test glasses after fixation test from the rectangular machine front top type observation hole, the test in the semicircle and the lower semicircle light source brightness is the same; if different, to adjust the two light source below the handle, the brightness of its two light source under the same, the same look above the light source the two pointer refers to each for a few degrees, that is the test results.
Product advantages: This product can replace Italy LEMA PA1 products
