产品描述：
德国Erler zimmer ECMO体外氧合训练模拟器。这个训练模型的特点是动脉和静脉循环，都使用自动泵操作，可以调节流量和脉动率。一个真实的病人可以模拟手术过程中可能发生的所有情况。
产品特点：
该机型适用于VA- ecmo和VV-ECMO。穿刺和插管可以使用真实的材料和仪器进行。动脉有8毫米的管腔，静脉是10毫米。这使得普通导管的使用没有任何问题。穿刺垫(左、右股静脉穿刺部位各1个，颈静脉穿刺部位1个)由可超声材料制成。这使得超声控制针头直到它到达血管管。Trainer可以与真正的ECMO机器一起使用，并提供真实的流体体积，以实际操作的机器。训练器也有4导联心电图的接触点。接触点可以连接到ECG模拟器(不包括)。静脉也有用于流量测量的连接器。

操作事项：
由于普通套管直径大，拔管后会留下较大的穿刺孔，因此模拟器具有集成的导管管理系统，可以在几秒钟内更换血管套管，避免了因血管更换而损失宝贵的培训时间。油管储层无形地集成到模型底座中，底座也作为运输箱的下部与小车滚轮一起工作。水库和水泵系统是分开的，可以通过快速锁定连接器轻松地连接到训练器。

产品描述：Simulator for training of extracorporeal Oxygenation. This training model features an arterial and venous circulation, both operated with automated pumps which can be adjusted in flow volume and pulsating rate. A real patient can be simulated with all possible conditions that may happen during the procedure. The model is suitable for VA- and VV-ECMO. The puncture and cannulation can be practiced using real materials and instruments. The arteries do have a lumen of 8 mm, the veins of 10 mm. This allows the use of common catheter types without any problems. The puncture pads (one each at left and right femoral puncture site and one at the jugular puncture site) are made of ultrasound capable material.

This allows ultrasound control of the needle until it reaches the vessel tube. The Trainer can be used with a real ECMO machine and provides realistic fluid
volume for realistic operation of the machine. The trainer also has contact points for 4-lead ECG. The contact points can be connected to a ECG simulator (not included). The veins also do have connectors for flow rate measurement.

Because of the big diameters of the common cannulas big puncture holes are left after withdrawing the cannula, so the simulator has an integrated tube management system that allows the replacement of the vessel tubes within a few seconds and avoids the loss of precious training time due to vessel replacement. The tubing reservoirs are integrated into the models base invisibly, the base also works as lower part of the transport case with trolley rollers. The water reservoir and pump system are separated and can be connected to the trainer easily by quick lock connectors.